Gestetner G056 Service Manual page 330

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER –7126/7126N
RICOH – AFICIO 2610/2610N
SAVIN –MLP26/MLP26N
SUBJECT: FIRMWARE MODIFICATION
GENERAL:
The latest firmware version can be downloaded at the Technology Solution Center FTP Site
http://tsc.ricohcorp.com. Be sure to check the README file for important notes and explanations.
NOTE: Refer to Facts Line Bulletin # FL002 and Publication Bulletin #023 for more information about the
FTP Internet Web Site and EPROM/Flash Card Exchange program.
G073/G074 PRINTER CONTROLLER FIRMWARE MODIFICATION
DESCRIPTION OF MODIFICATION
Firmware modified to correct the following:
•
Form Lines value (under PCL Menu) change after
rebooting the Machine.
•
Response to PJL INFO CONFIG command does not
include serial number.
•
The print may stop during the processing of the file
when using "INFICO".
•
Wrong suffix of the firmware printed on the
Configuration Page
   
Copyright 2003 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
G056/G058/G073/G074 - 017
FIRMWARE SERIAL
LEVEL NUMBER
G0735900 H December
2002
Production
02/18/2003
FIRMWARE
VERSION
1.08