Gestetner G056 Service Manual page 282

Rev. 08/2001
⇒
5,9 FIRMWARE HISTORY
5.9.1 G056/G058 PRINTER ENGINE FIRMWARE MODIFICATION
HISTORY
G056/G058 PRINT ENGINE FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
• Beginning of mass production
Firmware modified to correct the following.
• The engine process timing is changed to
further ensure that waste toner tank
overflow does not occur when the
machine is used under low duty.
Firmware modified to correct the following.
•
The machine was showing SC 546 when
the symptom was SC 541.
Duplex backside (leading edge)
registration adjustment was applied only
to by-pass feeding. Firmware modified
so that the adjustment is applied to all
paper sources.
Firmware modified to correct the following.
•
No changes from previous version (only
carryover items for Japanese domestic
version).
SM
5,9 FIRMWARE HISTORY
FIRMWARE SERIAL
LEVEL NUMBER
G0525172 D First Production
November 2000
G0525172 E
production
December 2000
G0525172 F
production
G0525172 H February 2001
production
5-19
FIRMWARE
VERSION
1.07
1.08
1.09
1.11
G056/G058