Static Configuration Rules; Table 2-8 Technical Data (Resources) Of The Hg 1500 Boards Defined As Media Gate - Siemens HiPath 5000 Service Manual

sysdat.fm
System Data

Static Configuration Rules

2.5

Static Configuration Rules

For information on the configuration of HG 1500 boards, refer to the HG 1500 Ad-
>
ministration Manual.
In HiPath 3000/5000 V6.0, HG 1500 provides the resources named in Table 2-8 via the
HG 1500 boards defined as media gateways (= gateway HG 1500, see Page 10-39).
Table 2-9 shows the board-specific capacity limits (maximum configuration) for the correspond-
ing functions.
Table 2-8 Technical Data (Resources) of the HG 1500 Boards Defined as Media Gate-
ways
Resource
Routing channels
A routing channel is required, for ex-
ample, for making connections be-
tween two IP networks via ISDN (IS-
DN routing).
Gateway channels (DSP channels)
A gateway channel is required, for
example, for connection between an
IP workpoint client and a TDM work-
point client (for example, optiPoint
500).
Fax/modem channels (G.711)
Fax channels (T.38)
These are special hardware re-
sources which facilitate fax via vCA-
PI and fax via IP functionality with
the T.38 protocol.
Teleworker with AES encryption and
codec G.711/G.729
rate) 20 msec)
2-24
with-
PDM1
2
(Sampling
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
HXGM3
with 1 with 2
out x x
PDM1 PDM1
16
16 24 32
16 24 32
3
10
HXGS3
HXGR3
with- with 1
out x
PDM1 PDM1
16
8 16
8 16
2
8
P31003-H3560-S403-54-7620, 09/05
STMI2
without
1
PDMX
16
32
32
3
10