Siemens HiPath 5000 Service Manual page 803

Note on Replacing the HiPath 3000 Control Board:
>
When the control board has been successfully replaced, the CDB must be trans-
ferred to HiPath 3000. A warning will appear that the MAC address is invalid. All li-
censes become invalid if the CDB is installed. The system goes into default and fea-
tures that are subject to mandatory licensing will suffer from reduced functionality.
The new license key (see step 12) must be used to achieve valid licensing.
Section 8.3.4 describes the procedure for distributing licenses with HiPath 3000
Manager E.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
licensing.fm
Licensing
Licensing Scenarios
8-25