Table 6-8 Getaccount - Data Record Structure - Siemens HiPath 5000 Service Manual

Data record structure
Table 6-8 GetAccount - Data Record Structure
No. Pos. Lengt
h
1 1 - 8
2 9 - 16
3 17 - 19
4 20 - 22
5 23 - 28
6 29 - 33
7 34 - 41
8 42 - 66
9 67 - 77
10 78
11 79 - 89
12 90 - 100
13 101 -
105
14 106 -
109
15 110
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
8 Date of call end
Format DD.MM.YY, for example "13.09.00"
8 Time of call end
Format hh:mm:ss, for example "14:14:00"
3 Trunk number
right-aligned with leading blanks, for example " 1"
3 Node ID for HiPath 3000 (matches the configuration in HiPath 3000
Manager E)
right-aligned with leading blanks
6 Internal extension number
right-aligned with leading blanks
5 Call duration in seconds
8 Call duration
Format hh:mm:ss, for example "00:04:34
25 For incoming calls: external caller number
●
For outgoing calls: external call number dialed including the call-
●
by-call number
left-aligned with succeeding blanks
11 Number of tariff units
right-aligned with leading blanks
1 Call type
1: incoming
●
2: outgoing (default)
●
11 Account code ACCT
left-aligned with succeeding blanks
11 MSN used
5 Trunk
right-aligned with leading blanks
4 LCR Selected Route (corresponds to configuration in HiPath 3000
Manager E)
right-aligned with leading blanks
1 CR
HiPath 5000 Startup and Administration
Description
start_h5.fm
GetAccount
6-59