Central Boards; Cbcc - Siemens HiPath 5000 Service Manual

boards.fm
Boards for HiPath 3000

Central Boards

3.2 Central Boards
Caution
7
The system must be powered down and de-energized before removing or inserting
all boards in the HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300 and before
removing or inserting the central boards of the HiPath 3800, HiPath 3750 and Hi-
Path 3700.
3.2.1

CBCC

Introduction
The CBCC board (Central Board with Coldfire Com, S30810-Q2935-A301) performs all central
control and switching functions for HiPath 3550 and HiPath 3350 (see Figure 3-1).
The CBCC central control board needs to be replaced for HiPath 3000 V6.0. The
>
CBCC S30810-Q2935-A301 board is required.
The "old" CBCC board S30810-Q2935-A201 is not supported.
Subboards
The following subboards can be used depending on the application:
Clock module CMA
●
MMC multimedia card
●
IMODN integrated modem card new (optional)
●
LIM LAN interface module (optional)
●
MPPI music on hold (optional)
●
EVM entry voice mail (optional)
●
Outputs, interfaces
Eight digital U
●
P0/E
For example, U
be connected here.
Four analog T/R subscriber lines
●
For U.S. only: These interfaces do not support the connection of external extensions via
OPS (Off-Premises Station) signaling.
For Australia only: The T/R interfaces supply a ring voltage of 35 V
terminals connected, we cannot exclude the possibility of errors occurring during ringing
state.
3-18
or CMS (optional)
subscriber lines
workpoint clients or BS3/1 base stations for HiPath Cordless Office can
P0/E
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
. Depending on the
eff
P31003-H3560-S403-54-7620, 09/05