Siemens HiPath 5000 Service Manual page 234

boards.fm
Boards for HiPath 3000
Peripheral Boards
Assigning both CAS cables
The following CAS cables are connected to the backplane via two APPCU adapters:
symmetrical line (120 ohms), open end
●
Table 3-56
15-pin Sub-D connector
Pin
9
1
15
8
coaxial line (75 ohms)
●
Table 3-57
15-pin Sub-D connector
Pin
15
8
9
1
3-144
Assigning the CAS cable S30267-Z167-A100
Assigning the CAS cable S30267-Z80-A100
a-wire (T), transmit
b-wire (R), transmit
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Function
a-wire (T), transmit
b-wire (R), transmit
a-wire (T), receive
b-wire (R), receive
Function
a-wire (T), receive
b-wire (R), receive
Color code
wht/blu
blu/wht
wht/ora
ora/wht
Wire
BNC line, cable 1
BNC shield, cable 1
BNC line, cable 2
BNC shield, cable 2
P31003-H3560-S403-54-7620, 09/05