Static Traffic Capacity - Siemens HiPath 5000 Service Manual

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3800
4.2.5.7

Static Traffic Capacity

The static traffic capacity of the HiPath 3800 system can be determined as follows.
Table 4-5 HiPath 3800 - Static Traffic Capacity
HiPath 3800
Single-cabinet sys-
tem
(see Page 4-46)
Two-cabinet system
(see Page 4-47)
1 The basic cabinet provides two PCM highway bundles with 2 x 4 PCM highways each. DIUN2, DIU2U (for U.S. only),
IVMNL, IVMN8 and STMI2 use the PCM highways from bundle F. Thus there are an additional 128 time-division
multiplex channels available for slots 1 – 5 and for slots 7 – 10 for these boards in the basic cabinet. If HiPath 3800
is used as a two-cabinet system, a use of PCM highway bundle F is not possible.
4-50
Slots per PCM seg-
ment
1 – 5
7 – 10
1 – 5
7 – 10
11 – 16
18 – 24
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Static traffic capac-
ity per PCM seg-
ment
128 erlangs +
1
(128 erlangs )
128 erlangs +
1
(128 erlangs )
128 erlangs
128 erlangs
128 erlangs
128 erlangs
P31003-H3560-S403-54-7620, 09/05
Total static traffic
capacity of the
system
512 erlangs
512 erlangs