Fax / Modem Channels - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:

Table of Contents

Dynamic Configuration Rules

If a large number of IP workpoint clients is required, the HG 1500 board may not also be used

as an ISDN router. In this case, ISDN routing functionality must be assigned to an individual

HG 1500 board.

Fax / Modem Channels

Fax and modem transmissions can be sent both over transparent G.711 gateway channels and

T.38 channels (fax only).

Although T.38 offers the more reliable method of fax transmission, it can only be used to a max-

imum of 14 Kbps. The number of T.38 channels available is limited by the higher processor

speed required for T.38. Alternatively, G.711 gateway channels can be used for fax transmis-

Note: The number of G.711 gateway channels available is reduced as soon as the DMC inter-

working feature is activated with HiPath 3000 Manager E.

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

Table of Contents

Hipath 3000 Hipath 3800