Mounting The System Cabinet With Angle Brackets - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:

Table of Contents

Mounting the System Cabinet with Angle Brackets

An assembly kit (C39165-A7027-D5) with eight angle brackets is provided for installing the 19-

inch cabinet.

Never attempt to lift a system cabinet into the 19-inch cabinet without assistance.

Attach a right-handed and a left-handed support bracket (A in Figure 4-74) to the

19-inch cabinet using two screws per bracket.

Remove the front and rear

Remove both side pieces of the system cabinet.

Attach the two angle brackets (B in Figure 4-74) to the front of the system cabinet

using two screws per bracket.

Attach the four angle brackets (C in Figure 4-74) to the rear of the system cabinet

for base and cover support.

Lift the system cabinet into the 19-inch cabinet and sit the cabinet on the two sup-

port brackets (A). Slide the cabinet into the 19-inch cabinet until the front edge of

the system cabinet is flush with the front of the 19-inch frame.

Attach the system cabinet to the angle bracket (B) in the 19-inch cabinet frame

using two screws per bracket.

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

Installing HiPath 3750, HiPath 3700

Installing HiPath 3000

Table of Contents

Hipath 3000 Hipath 3800