Installing Hipath 3000; Overview - Siemens HiPath 5000 Service Manual

4

Installing HiPath 3000

4.1

Overview

Chapter contents
This chapter discusses the topics listed in the following table.
Installing HiPath 3800, page 4-3
Installation Prerequisites, page 4-3
●
Installation Procedure, page 4-4
●
Installing HiPath 3800 (Standalone), page 4-5
●
Installing HiPath 3800 (19-Inch Cabinet), page 4-21
●
Installing Boards (Configuration Notes), page 4-31
●
Connecting the Cable to the Backplane, page 4-51
●
Using an External Main Distribution Frame or External Patch Panel, page 4-66
●
Loading the System Software and Installing Subboards on the CBSAP, page 4-81
●
Connecting Workpoint Clients, page 4-82
●
Making Trunk and Networking Connections, page 4-82
●
Performing a Visual Inspection, page 4-83
●
Installing HiPath 3750, HiPath 3700, page 4-85
Installation Prerequisites, page 4-85
●
Installation Procedure, page 4-86
●
Installing HiPath 3750, page 4-88
●
Installing HiPath 3700 (19-Inch Cabinet), page 4-129
●
Loading the System Software and Installing Subboards on the CBCPR, page 4-153
●
Configuration notes, page 4-154
●
Connecting Workpoint Clients, page 4-163
●
Making trunk connections, page 4-163
●
Performing a Visual Inspection, page 4-164
●
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300, page 4-165
Installation Prerequisites, page 4-165
●
Installation Procedure, page 4-166
●
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Topic
inst_h3.fm
Installing HiPath 3000
Overview
4-1