Slcn (Not For U.s.); Figure 3-77 Slcn (S30810-Q2193-X300) - Leds On The Front Panel - Siemens HiPath 5000 Service Manual

3.3.13

SLCN (Not for U.S.)

Introduction
The SLCN (Subscriber Line Module Cordless New) board is used in HiPath 3800 and connects
base stations to HiPath Cordless Office. There are 16 U
You can install up to four SLCN boards in one system.
Chapter 11 contains basic information on the options available for operating HiPath Cordless
Office.
Base stations must be clocked with a high degree of accuracy for HiPath Cordless Office. For
this, the subboard CMS
Front panel
Two LEDs indicating the board status:
LED (red)
●
LED (green)
●
Figure 3-77 SLCN (S30810-Q2193-X300) - LEDs on the Front Panel
To ensure sufficient shielding, provide the board with a shielding panel. For informa-
>
tion on mounting the shielding panel, see Section 4.2.5.2.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
must be plugged into the
ports available for this.
P0/E
CBSAP board (see Table 11-1).
boards.fm
Boards for HiPath 3000
Peripheral Boards
3-169