Settings In Local Profiles - Lucent Technologies MAX 6000 Configuration Manual

Settings in local profiles

Following are the parameters related to applying a filter (shown with their default settings):
Ethernet
Answer
Ethernet
Connections
Ethernet
Filters
Parameter
Call Filter
Data Filter
Filter Persistence
TOS Filter
Name
MAX 6000/3000 Network Configuration Guide
Use Answer As Defaults=Yes
Session Options...
Call Filter=0
Data Filter=0
Filter Persistence=No
Connection profile
IP Options...
TOS Filter=
Session Options...
Call Filter=0
Data Filter=0
Filter Persistence=No
Filters profile
Name=
Specifies
Name of a Filter profile. For details, see "Examples of applying a
call filter to a WAN interface" on page 14-28. The setting in the
Answer-Defaults profile is used only for RADIUS-authenticated
connections that do not include a call filter.
Name of a Filter profile. For details, see "Examples of applying a
data filter to a WAN interface" on page 14-27. The setting in the
Answer-Defaults profile is used only for RADIUS-authenticated
connections that do not include a data filter.
Enable/disable filter persistence across connection state changes.
Name of a Filter profile. For details, see "Examples of applying a
TOS filter to a WAN interface" on page 14-28.
Name of a Filter profile. For details, see "Example of applying a
filter to a LAN interface" on page 14-29.
Defining Static Filters
Applying a filter to an interface
14-25