Example Of Ipx Sap Filter Configuration - Lucent Technologies MAX 6000 Configuration Manual

Configuring IPX Routing
Creating and applying IPX SAP filters

Example of IPX SAP filter configuration

This example shows how to create an IPX SAP filter that prevents local NetWare users from
having access to a remote NetWare server. The example also shows how to apply the filter to
the Answer profile and to the Connection profile used to reach the server's remote network.
To define an IPX SAP filter that excludes a remote file server from the MAX unit's SAP table:
1
2
3
4
To apply the IPX SAP filter in the Answer profile and in a Connection profile:
1
2
3
4
11-24
Open IPX SAP Filter profile #1 (for this example) and then open the list of input filters:
Ethernet
IPX SAP Filters
First IPX SAP
Filter profile
Name=IPX SAP Main
Input SAP filters...
In SAP filter 01
In SAP filter 02
In SAP filter 03
In SAP filter 04
In SAP filter 05
In SAP filter 06
In SAP filter 07
In SAP filter 08
Open In SAP Filter 01 and activate it by setting Valid to Yes. Then set Type to Exclude.
Set the Server Name and Server Type parameters to specify the NetWare server's service
type (for a file server, 0004) and name, respectively. For example:
In SAP filter 01
Valid=Yes
Type=Exclude
Server Type=0004
Server Name=SERVER-1
Exit the profile and, at the exit prompt, select the exit and accept option.
Open Answer > Session Options.
Set the IPX SAP Filter parameter to specify profile #1, then close the Answer profile:
Ethernet
Answer
Session options...
IPX SAP Filter=1
Repeat the same assignment in Connections > Connection profile > Session Options.
Ethernet
Connections
Connection profile
Session options...
IPX SAP Filter=1
Exit the profile and, at the exit prompt, select the exit and accept option.
MAX 6000/3000 Network Configuration Guide