Customizing Script Support For X.25 Pad - Lucent Technologies MAX 6000 Configuration Manual

Configuring X.25

Customizing script support for X.25 PAD

Table 6-6. X.25 diagnostic field values (continued)
Hex
value
30
31
32
33
34
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
Customizing script support for X.25 PAD
The MAX X.25 PAD provides additional flexibility to work with a variety of devices that have
their own expectations of banner messages, PAD prompts, PAD commands, and PAD signals.
You can configure the banner messages, PAD prompts, and PAD commands to meet these
expectations.
Also referred to as a Triple-X PAD, the MAX X.25 PAD supports the X.3, X.28, and X.29
protocols.
6-24
Dec Diagnostic
value
48 Timer expired
49 For incoming call (or for DTE timer expired for call
request)
50 For clear indication (or for DTE timer expired or
retransmission count surpassed for clear request)
51 For reset indication (or for DTE timer expired or
retransmission count surpassed for reset request)
52 For restart indication (or for DTE timer expired or
retransmission count surpassed for restart request)
64 Call setup, call clearing, or registration problem
65 Facility/registration code not allowed
66 Facility parameter not allowed
67 Invalid called address
68 Invalid calling address
69 Invalid facility/registration length
70 Incoming call barred
71 No logical channel available
72 Call collision
73 Duplicate facility requested
74 Nonzero address length
75 Nonzero facility length
76 Facility not provided when expected
MAX 6000/3000 Network Configuration Guide