Encaps=X25/T3Pos - Lucent Technologies MAX 6000 Configuration Manual

Configuring Individual WAN Connections
The Connection profile
Parameter
CUG Index
NUI and PAD parameters
The remainder of the parameters in Ethernet > Connections > Connection profile > Encaps
Options provide NUI and PAD settings:
Parameter
NUI
PAD Banner Msg
PAD Prompt
NUI Prompt
NUI PW Prompt
PAD Alias #N

Encaps=X25/T3POS

When Connections > Connection profile > Encaps=X25/T3POS, the following parameters
appear in the interface for Ethernet > Connection > Connection profile > Encaps Options:
Ethernet
Connections
4-26
Specifies
Closed user group (CUG) index/selection facility to use in the next call
request. The CUG selection/index facility is used to indicate to the
called switch the closed user group selected for a virtual call. (A CUG
is a calling group to which access is restricted. A user can be a member
of more than one CUG. In general, members of a specific CUG can
communicate among themselves, but not with users outside the group.
In some cases, however, specific CUG members can originate calls to
destinations outside the group, or receive calls from outside the
group.)
Specifies
Set of Network User Identification (NUI) related facilities to use in the
next call request. NUI provides information to the network for billing,
security, and network management, and to invoke subscribed facilities.
Banner message that the user or a calling device sees when starting an
X.25 PAD (Triple-X) session on the unit. The PAD user can either be a
user or a calling device running a script. You can specify up to 32
characters. The default is null.
PAD prompt. You can specify up to 12 characters. The default is null.
Network User Identification (NUI) prompt for a PAD application. You
can specify up to 15 characters. The default is null. The value of NUI
Prompt overrides any value entered in the NUI setting. Encaps must be
set to X25/PAD for NUI to be applicable.
NUI password prompt for a PAD application. You can specify up to 12
characters. The default is null. This parameter is used as Call User
Data in the outbound Call Request Packet.
A string for single-command substitution. You can specify up to 40
characters. The default is null. For one command string (including a
space) to be treated as equivalent to another, you must enter a slash (/)
between the two strings. Encaps must be set to X25/PAD for PAD
Alias to be applicable.
Connection profile
x.25 Prof
Recv PW
Host init. mode
MAX 6000/3000 Network Configuration Guide