Setting Up Dhcp Spoofing - Lucent Technologies MAX 6000 Configuration Manual

Hide thumbs Also See for MAX 6000:

Table of Contents

Configuring Individual WAN Connections

Configuring DHCP services

Setting up DHCP spoofing

To set up DHCP spoofing, you must set the following parameters:

DHCP Spoofing

DHCP Spoofing=Yes

Always Spoof=No

Additionally, you can set the following parameters:

Renewal Time=nn

Become Def. Router=Yes|No

Dial If Link Down=Yes|No

Validate IP=Yes

Maximum no reply wait=n

For detailed information about each parameter, see the MAX Reference.

MAX 6000/3000 Network Configuration Guide

Table of Contents