Common Operational Messages - Paradyne COMSPHERE 3910 Installation And Operation Manual

COMSPHERE 3900 Series Modems
Status
Firmware Remote Clone
Download OK
Result
Cont.
Bcast Clone
Done
AT Command Reset by AT
Reset command
Messages listed in Table 3-4 are common operational messages that occur during modem
operation. These messages normally appear on the second line of the LCD.
Common
Operational Message
Please Wait...
Command Sent...
No Rem Response or
Remote Modem Fail
Command Complete
Invalid Command
3-12
Top-Level Menu Status
Message
A remote cloning of firmware was successful. This message
appears on the local modem's LCD.
A broadcast cloning of firmware has completed. You must look
under the Control branch for cloning results. This message appears
on the local modem's LCD.
The modem has performed a reset in response to an ATZ
command.

Common Operational Messages

A command to a local device takes more than two seconds to complete.
A command is sent to a remote modem.
A remote modem does not respond to a command within 5 seconds.
A command, issued to a local or remote modem, is completed.
The modem cannot complete a command.
November 1996
Table 3-3
(4 of 4)
Indicates
Table 3-4
Indicates
3910-A2-GN32-30