Circuit Pack Lock - Paradyne COMSPHERE 3910 Installation And Operation Manual

3910-A2-GN32-30
5. Press the key to place the SDCP in direct communication with the selected
Select
modem.
The LCD displays the Top-Level menu for the selected modem. In addition, the Front
Panel LED on the modem's faceplate and the OK LED on the SDCP light.
6. Once you have determined that the modem is installed properly and completed its
power-up self-test, rotate the circuit pack lock until it covers the faceplate latch
(Figure 2-3) and tighten the retention screw on the circuit pack lock. This prevents the
modem from accidently being removed once it is installed in a carrier.
7. Configure the modem as described in the Selecting Factory Configuration Options section
earlier in this chapter.
Figure 2-3. Circuit Pack Lock
November 1996
Modem Installation
2-11