Dial - Paradyne COMSPHERE 3910 Installation And Operation Manual

Status Configure

Dial

To access the Call Setup branch from the Top-Level menu, make the following selections:
Press the
Dial
For dial backup applications, Dial allows you to dial any telephone number stored in directory
locations 1–24. Any telephone number dialed using the DCP must already exist in a directory
location. Refer to Change Directory for information on storing telephone numbers in directory
locations.
For leased backup applications, Dial allows you to switch to the backup leased line. Any directory
location may be used. The remote modem cannot automatically answer the simulated call. Use the
Answer function of the remote modem in conjunction with the Dial function to manually switch to
the backup leased line.
To access Dial from the Call Setup branch, make the following selection:
Select Dial to display the first directory telephone number.
3910-A2-GN32-30
PList Control Test
(Dial
Backup
Answer
Dial_Standby
Disconnect
Return_to_Dial
Directory Locations 1 - 24
Leased:19.2
Call_Setup
F1 F2
key until Call_Setup appears. Select Call_Setup.
Call Setup:
Dial Disconnect
F1 F2
"Status"
SubHS
Call_Setup
only)
Change_Directory
or
F3
>
F3
November 1996
DCP Operation
Tlk/Data Security
Directory_Status
(Does not appear
in North America)
Remote
3-55