COMSPHERE 3900 Series Modems
To save the edited threshold(s):
Press the
Select Save.
If the edited VF thresholds are valid, the Save command stores them into nonvolatile memory.
When the Save completes, the message Save Completed appears.
If the edited VF threshold is invalid (out of range), the error message Thd Out of Range appears.
This indicates the Save procedure was unsuccessful. Return to the Edit screen and correct the
invalid threshold range.
To correct the invalid VF threshold, press the
Edit/Save/Reset screen.
Select Reset to restore the original default values into memory.
Repeat the Edit and Save procedure until the VF threshold(s) is valid and the Save completes
successfully (Save Completed).
To exit this function and remain in the Control branch, press the
Top-Level menu, press the
3-44
RSL High (- dBm)
Nxt
10
F1
F2
F3
key to scroll up to the Edit/Save screen.
VF Thresholds
Edit
Save
Reset
F1
F2
F3
Save VF Thresh
Thd Out of Range
F3
F1
F2
VF Thresholds
Edit
Save
Reset
F1
F2
F3
key.
November 1996
key to return to the VF Threshold
key. To exit and return to the
3910-A2-GN32-30