Paradyne COMSPHERE 3910 Installation And Operation Manual page 21

Specifications
ENVIRONMENT
Operating Temperature
Relative Humidity
Shock and Vibration
Storage Temperature
DTE INTERFACE
25-pin D-subminiature connector
MODEL 3910 POWER SUPPLY
AC POWER REQUIREMENTS
POWER CONSUMPTION
Model 3910
Model 3911
DIMENSIONS
Weight
Height
Width
Depth
TRANSMIT LEVEL
Leased Line (North America)
Leased Line (All Other Countries)
Dial Line (North America)
Dial Line (All Other Countries)
TELEPHONE INTERFACE
Leased-Line Connectivity
Dial-Line Connectivity
3910-A2-GN32-30
Table 1-1
(2 of 3)
Technical Specifications for 391x Series Modems
32 F (0 C) to 122 F (50 C)
5% to 90% (noncondensing)
Withstands normal shipping
– 4 F (–20 C) to 158 F (70 C)
EIA-232-D/CCITT V.24
100 to 250 Vac, 50 to 60 Hz
6 watts (typical, including power supply, speaker off)
4 watts (typical, each card) (Speaker consumption is
approximately 1 watt at high volume.)
2.5 pounds (1.14 kg) Model 3910 (without power supply)
1.0 pounds (0.45 kg) Model 3911
2.1 inches (5.4 cm) Model 3910
7.1 inches (18.1 cm) Model 3911
7.6 inches (19.4 cm) Model 3910
0.9 inches (2.3 cm) Model 3911
12.1 inches (30.8 cm) Model 3910
13.4 inches (34.0 cm) Model 3911
0 through –15 dBm (in 1 dBm decrements)
Factory default is 0 dBm
0 through –15 dBm (in 1 dBm decrements)
Factory default is country dependent
–10 through –32 dBm (in 1 dBm decrements)
Factory default is Permissive (–9 dBm)
Level setting is not accessible to the user
Factory default is country dependent
JM8 (Model 3910)
50-pin mass termination (Model 3911)
RJ11C Permissive
RJ21X Permissive 50-pin connector (Model 3911)
November 1996
Description
Introduction
1-9