Point-To-Point With Network Management; Configuration Options; Cables - Paradyne COMSPHERE 3910 Installation And Operation Manual

Point-to-Point with Network Management

Figure G-4 shows a sample configuration for point-to-point applications with network
management.
DTE
(Sync)
Cable 1
NMS
(6700
or
6800)
Figure G-4. Sample Configuration — Point-to-Point with Network Management

Configuration Options

3910 A
3910 B

Cables

Cable 1
Cable 2
Cable 4
3910-A2-GN32-30
19200(V32t)
TX
Leased
A
3910
NMS
3600- Cable 2
F3-
300
Hubbing
CC
Device
IN
Cable 4
Adapter
(002-0025-0031)
Use Sync Leased (Answer) default configuration options.
Use Sync Leased (Originate) default configuration options.
Use a standard, customer-supplied, EIA-232-D/V.24 cable with a DB-25-P (plug)
connector at one end to attach to the modem. Attach this to the connector labeled
DTE1.
Use part number 125-0053-1431 (an 8-position, 8-wire modular cord that is
supplied with the modem). Attach this to the connector labeled LEASED.
Use part number 835-1224-1011 (10 feet), part number 125-0040-0031 (12 feet),
part number 835-1224-2511 (25 feet), part number 835-1224-5011 (50 feet), or an
equivalent pin-to-pin 6-position, 6-wire modular cord. The maximum cable length
is 50 feet.
November 1996
19200(V32t)
TX
B
3910
(Sync)
Cable 2 Cable 1
Sample Configuration
DTE
G-5