Ricoh D009 Service Manual page 99

For installing the tray heater in the D352 (LCT)
1. Remove the rear cover of the mainframe (
2. Pull out the LCT drawer.
If the right tray comes out with the left tray, push the right tray into the LCT.
3. Left tray [A] ( x 2)
4. Remove the right tray [2] while pressing down the stopper [3].
When reinstalling the right tray, set the right tray on the guide rail and carefully
push the tray in, making sure to keep the tray level.
SM
Tray Heater (Optional Paper Feed Unit)
x 6).
1-65 D009/D011/D012/D013