Ricoh D009 Service Manual page 335

execution a message tells you whether the adjustment succeeded or
not.
Flag Reset
003
Resets the flag that indicates the status of the standard white plate density
adjustment.
White Balance Target: R
This value is the target value of red for the white level adjustment (CS model
4606
only).
[0 to 1023 / 784 / 1 digit]
4607 White Balance Target: G
This value is the target value of green for the white level adjustment.
001
CS: [1023 to 0 / 784 / 1 digit]
MS: [1023 to 1 / 876 / 1 digit]
White Balance Target: B (CS model only)
4608
This value is the target value of blue for the white level adjustment.
[1023 to 0 / 784 / 1 digit]
4623 Black Level Rough/Fine Adj. Display (CS model only)
Latest: RE Color
001
Displays the black offset value (rough adjustment) for the even green signal in
the SBU (color printing speed).
Latest: RO Color
002
Displays the black offset value (rough adjustment) for the odd green signal in the
SBU (color printing speed).
003 Latest: RE Color
SM
[0 to 255 / 128 / 1 digit]
[0 to 255 / 128 / 1 digit]
[0 to 255 / 128 / 1 digit]
5-49
SP4-xxx: Scanner-1
D009/D011/D012/D013