Ricoh D009 Service Manual page 467

807x 2 2 Pages
807x 3 3 Pages
807x 4 4 Pages
807x 5 5 Pages
807x 6 6 to10 Pages
807x 7 11to20 Pages
For example: When a copy job stored on the document server is printed in document
server mode, the appropriate L: counter (SP8076 0xx) increments.
Printing a fax report counts as a job and increments the F: counter (SP 8073).
Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
If a job is paused and re-started, it counts as one job.
If the finisher runs out of staples during a print and staple job, then the job is counted at
the time the error occurs.
For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying
the number of sets of copies by the number of pages scanned. (One duplex page
counts as 2.)
The first test print and subsequent test prints to adjust settings are added to the number
of pages of the copy job (SP 8072).
When printing the first page of a job from within the document server screen, the page is
counted.
T:FAX TX Jobs
These SPs count the total number of jobs (color or black-and-white) sent
8111
by fax, either directly or using a file stored on the document server, on a
telephone line.
Note: Color fax sending is not available at this time.
001 B/W
8113 F:FAX TX Jobs
SM
807x 9
807x 10
807x 11
807x 12
807x 13
807x 14
[0 to 9999999 / 0 / 1]
Black TX
[0 to 9999999 / 0 / 1]
5-181
SP8-xxx: Data Log2-2
51to100 Pages
101to300 Pages
301to500 Pages
501to700 Pages
701to1000 Pages
1001to Pages
D009/D011/D012/D013