Ricoh D009 Service Manual page 421

This is the mail address for POP Before SMTP mail address. When POP
Before SMTP certification is done in response to a send request for a
document or text mail, this SP sets the mail address for the SMTP protocol
MAIL FROM command in the following cases:
When the POP Before SMTP certification information has not been set
from the software application.
When the SMTP certification information for UCS has been set or
SMTP certification information has not set on the mainframe with the
User Tools.
Also, when SP5860-022 is set to "1" (Yes – "From" item switched), this
mail address is inserted into the header for the "From" item.
SMTP Auth Direct Sending
Select the authentication method for SMPT.
Bit 0: LOGIN
Bit 1: PLAIN
Bit 2: CRAM_MD5
025
Bit 3: DIGEST_MD5
Bit 4 to Bit 7: Not Used
This SP is activated only when SMTP authentication is enabled by
UP mode.
S/MIVE: MIME Header Setting
Selects the MIME header type of an E-mail sent by S/MIME.
[0 to 2 / 0 / 1]
026
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
5866 E-Mail Report
001 Report Validity
005 Add Date Field
SM
Enables or disables the E-mail alert function.
[0 or 1 / 0 / – ] 0: Enabled, 1: Disabled
Adds or does not add the date field to the header of the
5-135
SP5-xxx: Mode-5
D009/D011/D012/D013