SP5-xxx: Mode-4
These are delivery server settings.
FTP Port No.
001
[0 to 65535 / 3670 / 1]
IP Address (Primary)
002 Use this SP to set the Scan Router Server address. The IP address under
the transfer tab can be used with the initial system setting.
[Range: 000.000.000.000 to 255.255.255.255]
Delivery Error Display Time
Use this setting to set the length of time that the message is shown when a
006
test error occurs during document transfer with the NetFile application and
an external device.
[0 to 999/1]
IP Address (Secondary)
Sets the IP address that is given to the computer that is the secondary
008
delivery server for Scan Router. This SP lets you set only the IP address,
and does not refer to the DNS setting.
[Range: 000.000.000.000 to 255.255.255.255]
Delivery Server Model
Lets you change the model of the delivery server that is registered by the I/O
device.
[0 to 4/ 0 / 1 step]
009
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Delivery Svr. Capability
010
Changes the functions that the registered I/O device can do.
[0 to 255 / 0 / 1 step]
D009/D011/D012/D013
5-120
SM