Ricoh D009 Service Manual page 272

SC Tables: SC8xx -2
Log Data Error
CTL
An error is detected in the handling of the log data at power on or during
876
D
machine operation. This can be caused by switching the machine off
while it is operating.
1.
2.
Log Data Error 4
-004
Initialize the HDD with SP5832-004.
Log Data Error 5
-005
1.
2.
Log Data Error 99
-099
Ask your supervisor.
HDD DataOverwriteSecurity SD card error
The 'all delete' function cannot be executed but the DataOverwriteSecurity
Unit (D362) is installed and activated.
877 B
Defective SD card (D362)
SD card (D362) not installed
1. Replace the NVRAM and then install the new SD card (D362).
2. Check and reinstall the SD card (D362).
D009/D011/D012/D013
Invalid log encryption key due to defective NVRAM data
Initialize the HDD with SP5832-004.
Ask the customer's administrator to disable the HDD encryption
setting with a user tool.
Unusual HDD encryption function due to defective NVRAM data
Installed a NVRAM or HDD which was used in another machine
Reinstall the previous NVRAM or HDD.
Initialize the HDD with SP5832-004.
Other than the above causes
4-46 SM