Ricoh D009 Service Manual page 597

*1: The machine detects either DLT SEF or A3 SEF, depending on the setting of
SP5-181-2.
*2: The machine detects either LG SEF or B4 SEF, depending on the setting of
SP5-181-3.
*3: The machine detects either LT LEF or A4 LEF, depending on the setting of
SP5-181-1.
*4: The machine detects either Exe LEF or B5 LEF, depending on the setting of
SP5-181-4
SP 5-181-5 to –17 does similar functions for the tray 2 and optional paper trays.
The machine disables paper feed from a tray if the paper size cannot be detected (if the
paper size actuator is broken or no tray is installed).
For non-standard paper sizes, if they are not visible on the user tool screen for selecting
paper sizes, then set SP 5112 to "1". If the user selects one of these sizes, auto paper size
selection is disabled.
6.11.7 PAPER END DETECTION – TRAYS 1 AND 2
The paper stack raises the paper end feeler [A] and the paper end sensor [B] deactivates if
there is some paper in the paper tray.
When the paper tray runs out of paper, the paper end feeler [A] drops into the cutout in the
tray bottom plate. At this time the paper end sensor [B] activates.
SM 6-47
Paper Feed
D009/D011/D012/D013