Ricoh D009 Service Manual page 872

Error Codes
Code Meaning
Data Send to SMTP Server
14-08
Failed (5XX)
Authorization Failed for
14-09
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buffer Full
14-12 Data Size Too Large
14-13 Send Cancelled
14-14 Security Locked File Error
14-15 Mail Data Error
Maximum Division Number
14-16
Error
D346
Suggested Cause/Action
Failed to access the SMTP server because the
transmission failed.
SMTP server operating incorrectly
Destination folder setting incorrect.
Direct SMTP sending not operating correctly.
Software application error.
POP-Before-SMTP or SMTP authorization
failed.
Incorrect setting for file transfer
Number of broadcast addresses exceeded the
limit for the SMTP server.
The send buffer is full so the transmission
could not be completed. Buffer is full due to
using Scan-to-Email while the buffer is being
used send mail at the same time.
Transmission was cancelled because the
detected size of the file was too large.
Processing is interrupted because the user
pressed Stop.
Update the software because of the defective
software.
The transmitting a mail is interrupted via DCS
due to the incorrect data.
Update the software because of the defective
software.
When a mail is divided for the mail
transmission and the division number of a mail
are more than the specified number, the mail
transmission is interrupted.
Update the software because of the defective
26 SM