Ricoh D009 Service Manual page 271

Delete All error 1: HDD
A data error is detected for the HDD/NVRAM after the Delete All option has
been used.
Note: The source of this error is the DataOverwriteSecurity Unit (D362)
874 D
running from an SD card.
1. Turn the main switch off/on and try the operation again.
2. Install the DataOverwriteSecurity Unit again. For more, see "Installation".
3. HDD defective
Delete All error 2: Data area
An error occurs while the machine deletes data from the HDD.
875 D
Note: The source of this error is the DataOverwriteSecurity Unit (D362)
running from an SD card.
Turn the main switch off/on and try the operation again
Log Data Error
CTL
An error is detected in the handling of the log data at power on or during
876
D
machine operation. This can be caused by switching the machine off
while it is operating.
Log Data Error 1
-001
Damaged log data file in the HDD
Initialize the HDD with SP5832-004.
Log Data Error 2
HDD encryption unit not installed
-002
1. Ask the customer's administrator to disable the HDD encryption
setting with a user tool.
2. Install the HDD encryption unit.
-003 Log Data Error 3
SM 4-45
SC Tables: SC8xx -2
D009/D011/D012/D013