Ricoh D009 Service Manual page 391

0: Disable. Setting the fax unit off-hook does not interrupt a fax transaction in
progress. If the off-hook button is pushed during a embedded RCG-M
transmission, the button must be pushed again to set the fax unit on-hook after
the embedded RCG-M transmission has completed.
1: Enable. When embedded RCG-M shares a line with a fax unit, setting the
fax unit off-hook will interrupt a embedded RCG-M transmission in progress
and open the line for a fax transaction.
Manual Polling
200
No information is available at this time.
Regist: Status
Displays a number that indicates the status of the @Remote service device.
Neither the registered device by the external nor embedded RCG device
0
is set.
The embedded RCG device is being set. Only Box registration is
1 completed. In this status, this unit cannot answer a polling request from
201
the external RCG.
The embedded RCG device is set. In this status, the external RCG unit
2
cannot answer a polling request.
The registered device by the external RCG is being set. In this status the
3
embedded RCG device cannot be set.
4 The registered module by the external RCG has not started.
Letter Number
202
Allows entry of the number of the request needed for the embedded RCG.
Confirm Execute
203
Executes the inquiry request to the @Remote Gate Way URL.
204 Confirm Result
Displays a number that indicates the result of the inquiry executed with
SP5816-203.
SM 5-105
SP5-xxx: Mode-3
D009/D011/D012/D013