Ricoh D009 Service Manual page 333

4584* Fax: Original 1
4585* Fax: Original 2
MTF: 0(Off), 1-15(High)
-005
Sets the MTF level (Modulation Transfer Function) designed to improve
image contrast. Set higher for stronger effect, lower for weaker effect.
Smoothing: 0(x1), 1-7(High)
-006
Use to remove "jaggies" if they appear. Set higher for smoother images.
Brightness: 1-255
-007
Set higher for darker, set lower for lighter.
Contrast: 1-255
-008
Set higher for more contrast, set lower for less contrast.
Ind. Dot Erase: 0(x1), 1-7(High)
-009 Sets the erasure level of Irregular Dots. Set higher for stronger effect, lower
for weaker effect.
0: Not activated
Texture Erase: 0(Fix), 1-2(High)
-010 Sets the erasure level of textures. Set higher for stronger effect, lower for
weaker effect. This SP (suffix "-010") only exists in SP4580, 4582 and 4583.
0: Not activated
SBU Version
4600
Displays the ID of the SBU.
4602 Scanner Memory Access
001 Scanner Memory Access
SM
[0 to 15 / 8 / 1 ]
0: MTF OFF
[0 to 7 / 4 / 1 ]
[1 to 255 / 128 / 1 ]
[1 to 255 / 128 / 1 ]
[0 to 7 / 0 / 1 ]
[0 to 2 / 0 / 1]
Enables the read and write check for the
5-47
SP4-xxx: Scanner-1
D009/D011/D012/D013