Ricoh D009 Service Manual page 936

Bit Switches
No FUNCTION
0-4 Not used
IP-Fax dial-in routing selection
5 0: Off
1: On
6-7 Not used
Communication Switch 19 - Not used (do not change the settings)
Communication Switch 1A - Not used (do not change the settings)
Communication Switch 1B [SP No. 1-104-028]
No FUNCTION
Extension access code (0 to 7)
to turn V.8 protocol On/Off
0-7 0: On
1: Off
Communication Switch 1C [SP No. 1-104-029]
No FUNCTION
Extension access code (8 and
9) to turn V.8 protocol On/Off
0-1
0: On
1: Off
2-7 Not used
D346
COMMENTS
Do not change the factory settings.
1: Transfers receiving data to each IP-Fax dial-in
number.
IP-Fax dial-in number is 4 digit-number.
Do not change the factory settings.
COMMENTS
If the PABX does not support V.8/V.34 protocol
procedure, set this bit to "1" to disable V.8.
Example: If "0" is the PSTN access code, set bit 0
to 1. When the machine detects "0" as the first
dialed number, it automatically disables V.8
protocol. (Alternatively, if "3" is the PSTN access
code, set bit 3 to 1.)
COMMENTS
Refer to communication switch 1B.
Example: If "8" is the PSTN access code, set bit 0
to 1. When the machine detects "8" as the first
dialed number, it automatically disables V.8
protocol. (If "9" is the PSTN access code, use bit
1.)
Do not change the settings.
90 SM