Ricoh D009 Service Manual page 913

System Switch 1C - Not used (do not change these settings)
System Switch 1D [SP No. 1-101-030]
No FUNCTION
RTI/CSI/CPS code display
0 0: ON
1: OFF
1-7 Not used
System Switch 1E [SP No. 1-101-031]
No FUNCTION
Communication after the
Journal data storage area has
0 become full
0: ON
1: OFF
Action when the SAF memory
has become full during
1 scanning
0: The current page is erased.
1: The entire file is erased.
SM
COMMENTS
0: RTI, CSI, CPS codes are displayed on the top
line of the LCD panel during communication.
1: Codes are switched off (no display)
Do not change these settings.
COMMENTS
0: When this switch is on and the journal history
becomes full, the next report prints. If the journal
history is not deleted, the next transmission
cannot be received. This prevents overwriting
communication records before the machine can
print them.
1: If the buffer memory of the communication
records for the Journal is full, fax communications
are still possible. But the machine will overwrite
the oldest communication records.
Note: This setting is effective only when Automatic
Journal printout is enabled but the machine cannot
print the report (e.g., no paper).
0: If the SAF memory becomes full during
scanning, the successfully scanned pages are
transmitted.
1: If the SAF memory becomes full during
scanning, the file is erased and no pages are
transmitted.
This bit switch is ignored for parallel memory
67
Bit Switches
D346