Ricoh D009 Service Manual page 396

SP5-xxx: Mode-3
machine started up with DHCP.
Active IPv4 Subnet Mask
022
This SP allows you to confirm the IPv4 subnet mask setting that was used
when the machine started up with DHCP.
Active IPv4 Gateway Address
023
This SP allows you to confirm the IPv4 default gateway setting that was
used when the machine started up with DHCP.
1284 Compatibility
050
(Centro)
052 ECP (Centro)
065 Job Spooling
Job Spooling Clear: Start
066
Time
069 Job Spooling (Protocol)
D009/D011/D012/D013
Enables and disables bi-directional
communication on the parallel connection
between the machine and a computer.
[0 to 1 / 1 / 1 ]
0:Off, 1: On
Disables and enables the ECP feature (1284
Mode) for data transfer.
[0 to 1 / 1 / 1]
0: Disabled, 1: Enabled
Switches the job spooling on and off.
[0 to 1 / 0 / 1]
0: No spooling, 1: Spooling enabled
This SP determines whether the job interrupted
at power off is resumed at the next power on.
This SP operates only when SP5828-065 is set
to "1".
[0 to 1 / 1 / 1]
1: Resumes printing spooled jog.
0: Clears spooled job.
This SP determines whether job spooling is
enabled or disabled for each protocol. This is a
8-bit setting.
[0 to 1 / 1 / 1]
0: No spooling, 1: Spooling enabled
5-110 SM