Ricoh D009 Service Manual page 425

6: SAVIN 9050b
7: SAVIN 9050
8: Gestetner MP 4000B
9: Gestetner MP 4000
10: Gestetner MP 5000B
11: Gestetner MP 5000
5913* Switchover Permission Time
Print Application Timer
002 Sets the length of time to elapse before allowing another application to take
control of the display when the application currently controlling the display is
not operating because a key has not been pressed.
Switchover Permission Time
Enable and disable the document server. This is a security measure that
5967*
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable
the new setting.
Cherry Server
Selects which version of the Scan Router application program, "Light" or
"Full" (Professional) is installed.
5974*
[0 or 1 / 0 / - ]
0: Light
1: Full
Device Setting
The NIC and USB support features are built into the GW controller. Use this
5985
SP to enable and disable these features. In order to use the NIC and USB
functions built into the controller board, these SP codes must be set to "1".
SM
18: NRG MP 5000B
19: NRG MP 5000
20: infotec MP 4000B
21: infotec MP 4000
22 infotec MP 5000B
23 infotec MP 5000
[3 to 30 / 3 / 1 second step]
0: ON, 1: OFF
5-139
SP5-xxx: Mode-5
D009/D011/D012/D013