3Com AP9152 Hardware Installation Manual page 9

to a fixed object to prevent theft. Follow these steps to lock the AP to a fixed object:
Step1 Fix the security cable to a nearby fixed object.
Step2 Insert the locking plate in the security slot to lock the AP.
Before installing the security lock:
After installing the security lock:
Note: The lock is user supplied.
Mounting the AP on a Ceiling
Note:
1) To use this installation method, make sure that the thickness of the ceiling is
less than 18 mm (0.71 in.), and the ceiling can bear the weight of at least 5 kg
(11.02 lb).
2) You are not recommended to use this method to mount the AP to a location
made of low-intensity materials such as a plaster ceiling. If this installation
method is required in such an environment, put a high-intensity plate beneath
the nut to secure the installation.
Select the two mounting holes of the wall-mounting bracket as shown in Figure5 to
mount the AP on the ceiling (in mm). Follow these steps to mount the AP on the ceiling:
Step1 Drill two holes in the ceiling corresponding to the two mounting holes in the
wall-mounting bracket.
Figure4 Lock the AP9152 to a fixed object
(1)
(1) Security slot
(2) Security lock
(3) Security cable
6
(2)
(3)