3Com AP9152 Hardware Installation Manual page 104

802.11n 2.4/5ghz single-band access point
Hide thumbs Also See for AP9152:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Härmed intygar 3Com Corporation att denna RLAN device står I
Svenska
överensstämmelse med de väsentliga egenskapskrav och övriga
[Swedish]
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Hér með lýsir 3Com Corporation yfir því að RLAN device er í
Íslenska
samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun
[Icelandic]
1999/5/EC.
3Com Corporation erklærer herved at utstyret RLAN device er i
Norsk
samsvar med de grunnleggende krav og øvrige relevante krav i
[Norwegian]
direktiv 1999/5/EF.
A copy of the signed Declaration of Conformity can be downloaded from the Product
Support web page for the 3Com AP9152 Dual Band 802.11n PoE Access Point
(3CRWE915275) at http://www.3com.com.
Also available at http://support.3com.com/doc/WL-607_EU_DOC.pdf
Table2 Overview of Regulatory Requirements for Wireless LANs
Frequency Band
(MHz)
2400–2483.5
5150–5350
5470–5725
Note: Dynamic Frequency Selection and Transmit Power Control is required in the
5250- to 5350-MHz and 5470- to 5725-MHz frequency range.
EU Country Restriction in 2.4GHz band
This device may be used indoors or outdoors in all countries of the European
Community using the 2.4GHz band: Channel 1-13, except where noted below.
1) In France, the output power is restricted to 10 mW EIRP when the product is
used outdoors in the band 2454 - 2483.5 MHz. There are no restrictions
when used in other parts of the 2.4 GHz band.
EU Country Restriction in 5GHz band
1) In Italy the end-user must apply for a license from the national spectrum
authority to operate this device outdoors.
2) To remain in conformance with European spectrum usage laws for Wireless
LAN operation, the above 2.4GHz and 5GHz channel limitations apply. The
user should check the current channel of operation. If operation is occurring
outside of the allowable frequencies as listed above, the user must cease
operating the 3Com AP9152 Dual Band 802.11n PoE Access Point
Max Power
(EIRP) (mW) Indoor
Level
100 mW
200 mW
X
1000 mW
101
Indoor and
ONLY
X
X
Outdoor

Advertisement

Table of Contents
loading

Table of Contents