Figure 11-3 Ac Adaptor And Power Cable - Zte NetNumen U31 R06 Hardware Installation Manual

Figure 11-3 AC Adaptor and Power Cable

1. AC power cable
Note:
The three-pole plug is for reference only and may vary in different countries.
3. Perform the following procedures to connect the
terminal on the bottom right of the alarm box.
a. Connect the exposed wire marked with
supply.
b. Connect the other exposed wire to the –48 V terminal.
4. Select either of the following cable routing methods to install the
on the wall in accordance with the installation place of the alarm box.
Option
Top routing
Bottom routing
5. Route the power cable and the network cable into the
install the cover plate of the cable trunking.
Note:
The AC
– End of Steps –
SJ-20141121113158-006|2014-12-20 (R1.0)
Description
Mount the PVC
cables can be routed along the cable ladder and then into the cabinet.
Mount the PVC
can be routed along the cable tray under the floor and then into the cabinet.
adapter should be placed in a safe place.
Chapter 11 Peripheral Device Installation
2. AC adaptor
AC
RTN to the –48 VRTN terminal of the power
cable trunking along the wall to the cable ladder so that the
cable trunking along the wall to the floor so that the cables
11-5
ZTE Proprietary and Confidential
power cable to the power supply
PVC cable trunking
PVC cable trunking, and then