Figure 5-8 Drilling Indentations
5. Adjust the scale that determines the depth of the hole, and then press the percussion
drill downward vertically to drill holes. Use the vacuum cleaner to remove the dust
inside and outside the holes, see
Figure 5-9 Drilling a Hole
1. Vacuum cleaner
6. Remove the bolt, spring washer, insulating washer, and gasket of the AN01 socket
bolt.
For the overview of AN01 socket bolt, see
SJ-20141121113158-006|2014-12-20 (R1.0)
Figure
5-9.
2. Percussion drill
Figure
5-10.
5-7
ZTE Proprietary and Confidential
Chapter 5 Cabinet Installation