Figure 5-4 Adjustable Base Of Type A; Figure 5-5 Marking Holes For Installing A Single Cabinet (Unit: Mm) - Zte NetNumen U31 R06 Hardware Installation Manual

Figure 5-4 Adjustable Base of Type A

Steps
Positioning the adjustable base
1. Remove the static conductive floor and its braces at the place where the cabinet is to
be installed.
2. Draw lines by using measurement tools and line-drawing tools to mark the installation
holes for the adjustable base.
l
For the position of holes for installing a single cabinet, see

Figure 5-5 Marking Holes for Installing a Single Cabinet (Unit: mm)

1. Installation hole
l
For the installation holes of socket bolts for the adjustable bases to install multiple
cabinets, see
SJ-20141121113158-006|2014-12-20 (R1.0)
2. Wall
Figure 5-6.
5-5
Chapter 5 Cabinet Installation
Figure 5-5.
ZTE Proprietary and Confidential