Adf Hinge (Left And Right) Removal - Lexmark X734de Service Manual

7526
Remove the ADF pressure plate cover. See
4.
5. Use a flat-blade screwdriver to open the latch (C) the output sensor card.
Remove the ADF exit sensor and cable.
6.

ADF hinge (left and right) removal

The hinges are removed in a similar manner. Only one hinge is shown in this removal.
1. Remove the ADF. See
Turn the ADF over.
2.
Remove the four screws (A) of the hinge you want to remove.
3.
Remove the hinge.
4.
Service Manual
4-256
"ADF pressure plate cover removal" on page 4-265
"ADF removal (entire)" on page 4-248.
Previous
Next
Go Back