Avaya 4550T-PWR+ Fundamentals page 64

Configuration files fundamentals
Downloading an ASCII configuration from a USB device using EDM
Procedure
1. From the navigation tree, double-click Edit to open the Edit tree.
2. Click File System.
3. Click the Ascii Config Script Files tab.
4. Double-click the ScriptSource field and type the configuration file name in the
5. Double-click the ScriptManual field, and then select Download from the list.
6. On the toolbar, click Apply.
Downloading a configuration file automatically using EDM
Procedure
1. From the navigation tree, double-click Edit.
2. Click File System.
3. Click the Ascii Config Script Files tab.
4. Double-click the ScriptSource field and type the TFTP server IP address and the
5. Double-click the ScriptBootPriortity field and type a digit between 1 and 127 for
6. On the toolbar, click Apply.
64 Fundamentals
following format: usb://<filename> for a USB device in a standalone unit or
usb://<unit number>/<filename> for a USB device in a unit in a stack.
configuration file name in the following format: tftp://<ip address>/
<filename>. Substitute usb://<filename> to retrieve a configuration from a
USB device in a stand-alone unit or usb://<unit number>/<filename> if the
USB device resides in a unit in a stack. If you retrieve the configuration file from a
BOOTP server, type bootp:// in the ScriptSource field.
the script priority; use 0 if you are not using the entry at startup.
Comments? infodev@avaya.com
December 2011