Avaya 4550T-PWR+ Fundamentals page 30

User interface fundamentals
Button
Edit Selected — in addition to the existing edit methods, and depending on which
object you select on the Device Physical View, you can use this toolbar button to
open Edit > Chassis, Edit > Unit, or Edit > Ports tabs. If you do not select an
object from the Device Physical View and you click the Edit Select toolbar button,
the Edit > Chassis tab opens.
Graph Selected — depending on which object you select on the Device Physical
View, you can use this toolbar button to open Graph > Chassis or Graph > Port
tabs. If you do not make a selection on the Device Physical View, or if you select
Unit, the Graph > Chassis tab opens.
Save Config — you can use the Save Config toolbar button to save the
configuration to flash memory.
Help Setup Guide — this button connects you to the help setup guide for
embedded EDM and it replaces the link that appeared on the top right of work
panes.
Menu bar
The menu bar appears above the work area and consists of two rows of tabs.
The top row displays tabs that were accessed from the navigation tree during the active
session. The tabs in this row, called primary tabs, are docked and available to reopen on
demand. The docked tabs appear in the sequence that you accessed them.
When you click a primary tab from the menu bar, the associated secondary tabs appear in the
second row and the default dialog box appears in the work area. Click any secondary tab to
display its associated dialog box.
Figure 4: Menu bar
If you want to open a dialog without displacing the current open dialog, you can go to the tab
on the menu bar and undock the tab by using your mouse to drag and drop it into the work
area. You can drag the dialog box to any location on the screen and you can toggle between
the open dialog boxes to compare information and make changes. When you no longer need
the undocked tab, you can use the three buttons on the upper right side of the tab to temporarily
shrink it, re-dock it, or close it.
Important:
When you undock a tab to make changes, and then return to another open tab, in order to
see the effects of the changes you must click the Refresh button on the tool bar.
30 Fundamentals
Description
Comments? infodev@avaya.com
December 2011