Avaya 4550T-PWR+ Fundamentals page 66

Configuration files fundamentals
Downloading a binary configuration file from a TFTP server using EDM
Procedure
1. From the navigation tree, double-click Edit .
2. Click File System.
3. Click the Config/Image/Diag file tab.
4. In the TftpServerInetAddress field, enter the TFTP server IP address.
5. In the BinaryConfigFilename field, enter the configuration file name.
6. In the BinaryConfigUnitNumber field, enter the stack unit number or, for a stand-
7. In the Action field, click the dnldConfig button.
8. On the toolbar, click Apply.
Downloading a binary configuration file from a USB device using EDM
Procedure
1. From the navigation tree, double-click Edit .
2. Click File System.
3. Click the Config/Image/Diag file tab.
4. In the BinaryConfigFilename field, enter the configuration file name.
5. In the BinaryConfigUnitNumber field, enter the stack unit number or, for a stand-
6. In the UsbTargetUnit field, enter the stack unit number where the USB resides.
7. In the Action field, click the dnldConfigFromUsb button.
8. On the toolbar, click Apply.
Saving current configuration to flash memory manually using EDM
Procedure
1. From the navigation tree, double-click Edit.
2. Click File System.
66 Fundamentals
alone switch, enter 0.
alone switch, enter 0.
Comments? infodev@avaya.com
December 2011