Configure Vlans And Tagged Uplinks - Avaya 4550T-PWR+ Fundamentals

ACLI quick reference
clock source ntp
default clock source
clock sync-rtc-with-ntp enable
no clock sync-rtc-with-ntp enable
default clock sync-rtc-with-ntp enable
ntp [interval]
default ntp [interval]
ntp authentication-key <1-2147483647>
<word>
no ntp authentication-key
[ <1-2147483647> ]
default ntp authentication-key
[ <1-2147483647> ]
ntp server [ <A.B.C.D> | [<IPv6_address>]
default ntp server [ <A.B.C.D> |
[<IPv6_address>]
no ntp server [ <A.B.C.D> | <IPv6_address>] Delete an NTP server.
show ntp
show ntp key
show ntp server
show ntp statistics

Configure VLANs and tagged uplinks

Perform the commands in the following table to configure VLANs and tagged uplinks.
76 Fundamentals
Command
Comments? infodev@avaya.com
Purpose
Set the clock source to NTP.
Reset clock source to the default, SNTP.
Synchronize RTC with NTP where
available.
Desynchronize RTC with NTP.
Set RTC to default – no synchronization with
NTP or SNTP.
Enable NTP globally and specify the interval
(in minutes) between NTP updates.
Set NTP globally to default (disabled) and the
default interval of 15 minutes.
Create authentication keys for MD5
authentication (maximum of 10).
Deletes authentication keys for MD5
authentication.
Sets authentication keys to the default
value.
Adds NTP server entries.
Sets NTP server entries to the default
value.
Display NTP global settings.
Display NTP authentication keys.
Display NTP server list and settings.
Display NTP statistics such as NTP server ip
address, stratum, version, sync status,
reachability, root delay, access attempts,
server sync statistics and server fail
statistics.
December 2011