Avaya 4550T-PWR+ Fundamentals page 58

Configuration files fundamentals
Downloading a configuration file automatically using ACLI
Procedure
1. Access the Privileged EXEC ACLI mode.
2. Enter the configure network load-on-boot {disable | use-bootp |
ACLI command job aids
The following table describes the copy running-config command variables.
{tftp | sftp | usb}
address <A.B.C.D> | <WORD>
filename <name>
username <WORD>
[password]
The following table describes the copy config tftp unit command variables.
address <A.B.C.D> | <WORD>
58 Fundamentals
use-config} address <A.B.C.D> | <ipv6_address> filename
<name> command to configure a switch or stack to automatically load a
configuration file.
Variable
Variable
Comments? infodev@avaya.com
Definition
Specifies whether to save the file to a TFTP
or SFTP server or a USB mass storage
device.
Note:
Not all switch models have a USB port.
Specifies the address of the TFTP or SFTP
server.
• A.B.C.D—specifies the IP address
• WORD—specifies the IPv6 address
Specifies the configuration file name.
Specifies the username for downloading a
configuration file automatically using ACLI.
Specifies the password for downloading a
configuration file automatically using ACLI.
Definition
Specifies the address of the TFTP or SFTP
server.
• A.B.C.D—specifies the IP address
• WORD—specifies the IPv6 address
December 2011