License Generation; Generating A License File - Avaya 4550T-PWR+ Fundamentals

Feature licensing fundamentals
• license file generation
• installation of the license file on the switch

License generation

After purchasing a license kit, a license file must be generated on the licensing portal. This
licensing portal acts as a license bank to store all license entitlements and licenses.
The license certificate found in the license kit contains a License Authorization Code (LAC).
This LAC is submitted to the license portal, which deposits license entitlements into a license
bank. This license entitlement is combined with the switch MAC address to generate a license
file. Because license files are generated based on a switch MAC address, the license file must
contain the authorized MAC addresses of the switches where it will be installed.
A license can contain multiple MAC addresses and MAC addresses can be added to the
license file at a later time. A single license file can support more than one MAC address. The
number of MAC addresses supported is dependent on the type of license. To support licensed
features in a stack, use the MAC address of the Base Unit.
The following table provides information on the license kits available for the Avaya Ethernet
Routing Switch 4000:
Part Number
AL4516001
AL4516002

Generating a license file

About this task
This section contains the procedure for license file generation. Ensure the following
prerequisites are met before generating a license:
• Purchase a license kit
• Ensure a properly configured TFTP server is reachable from the switch or stack on, which
the license file will be installed.
• Obtain the switch base MAC addresses for the switches that use licensed features.
• Ensure the default web browser does not automatically decompress the files.
14 Fundamentals
License Type
ERS4500 Adv License
ERS4500 Adv License
Comments? infodev@avaya.com
Number of Switches / MAC
Addresses Supported
1
10
December 2011